Thermal-Transfer Cryogenic Labels with SimPEEL™ Technology for Frozen Surfaces – 1″ x 1″ #SPUC-29NP (PATENT PENDING)

Yes, thermal-transfer CryoSTUCK labels require a thermal-transfer ink ribbon to be printed. These labels require an RR-class ribbon of the same width or larger, compatible with the thermal-transfer printer being used.

No, an overlap is not required for the proper adhesion of these cryogenic labels on ambient or frozen, curved and flat surfaces.

Yes, CryoSTUCK labels have been specially designed for identifying already frozen surfaces. They can be affixed at a minimum temperature of -80°C/-112°F, eliminating the need to thaw valuable samples.

To ensure proper application of these labels, wipe the surface with a clean, lint-free, disposable wipe (e.g: KimWipe™) prior to affixing the label to remove excess frost. Apply the edge of the label first and press firmly to anchor it while avoiding excessive contact with the adhesive. Then press the label securely into position along the vials’ entire circumference.

Yes, CryoSTUCK labels can be used to label samples prior to storing them in low-temperature freezers and liquid nitrogen tanks for prolonged periods.

No, the vials can be stored in liquid nitrogen (-196°C/-321°F) or ultra-low temperature freezers (-80°C/-112°F) immediately following label application, requiring no cure time.

No, these CryoSTUCK labels are not designed to be applied over an existing label. To cover-up existing labels, our blackout CryoSTUCK labels will conceal pre-existing information, while our clear CryoSTUCK labels can be applied over an existing label, acting as a laminate to reinforce it.

Yes, these thermal-transfer CryoSTUCK labels are resistant to one standard autoclave cycle (+121°C/+249°F, 16psi, 20 minutes).

No, these CryoSTUCK labels have a permanent adhesive that is not made for easy removal.

Please consult our handy sizing guide, where you will find recommendations for the most common vial/tube sizes.

No, these labels are currently available only in white. For additional color options, contact our technical support team.

Yes, these labels are made from the same durable materials as the non-SimPEEL version.

Yes, SimPEEL reduces the time needed to label vials and tubes by making the peeling and application steps quicker and easier.

Yes, our SimPEEL technology is designed to make peeling labels off their liner quick and easy.

Yes, SimPEEL labels have an adhesive-free tab that allows the labels to be handled without touching the label adhesive, providing a glove-friendly labeling option.

SimPEEL technology is simple to use. Simply use the adhesive-free tab to effortlessly peel the label from its liner, apply the other adhesive end to the container you wish to label, remove the tab, and finish applying the label.

Yes, the margin on these labels is somewhat larger, so some adjustments must be made to your label design template. For more details, please consult our technical support team.

Yes, we can add our SimPEEL technology to any of our existing label products. For more details, please consult our technical support team.

Barcoding or label design software can be used to create templates that conform to your label’s size. You can then insert design elements within the template for easy printing.

Yes, barcoding or label design software, such as BarTender and ZebraDesigner can be used to create templates that conform to your label’s size. You can then insert design elements within the template for easy printing.

Yes, we can provide our CryoSTUCK labels featuring SimPEEL technology preprinted with full-color graphics and logos, as well as variable or serialized information from a database. Learn more about our custom printing options.