cab SQUIX Thermal-Transfer / Direct Thermal Industrial Printer #SQUIX 4 M


Contact Us to Purchase


cab SQUIX Thermal-Transfer / Direct Thermal Industrial Printer

Model: SQUIX4 M (Center Aligned)

Print Method: Direct Thermal/Thermal-Transfer

Resolution: 300 dpi

Print speed up to: 11.8 in/s (300 mm/s)

Print width up to: 4.16” (105.7 mm)

Labels Width: 0.157” – 4.33” (4 – 110 mm)

Labels Height: 0.157” – 78.7” (4 – 2,000 mm)

Labels Thickness: 0.002” – 0.019” (0.05 – 0.50 mm)

Liner material Width: 0.354” – 4.49” (9 – 114 mm)

Liner material Thickness: 0.001” – 0.005” (0.03 – 0.13 mm)

Roll Outer Diameter: 8” (205 mm)

Roll Core diameter: 1.5” – 3.94” (38.1 – 100 mm)

Interfaces: USB, Serial (RS232C), Ethernet 10/100, WLAN 802.11b, g, n.

The cab SQUIX is a reliable thermal printer that can print 300 dpi text and barcodes in thermal-transfer and direct thermal modes. Ideal for large volume printing, the SQUIX industrial printer has a higher printing speed than the MACH1, printing up to 300 mm/s. The SQUIX also includes an operational panel with easy-to-understand symbols and device settings that enables the printer to be operated intuitively. Furthermore, the SQUIX allows mobile devices to connect wirelessly, directly to the printer via WLAN, in addition to its other connection options.


  • 300 dpi print resolution for small label printing
  • High printing speeds, up to 300 mm/s
  • Thermal-transfer and direct thermal modes available
  • USB, serial, Ethernet, and WLAN (wireless) connection options

What’s Included:

  • SQUIX 4M label printer
  • Power cable
  • USB cable
  • Operation manual



No reviews found

Frequently Asked Questions

No, an ink ribbon is only required for printing in thermal-transfer mode. Please contact our technical support team with any questions you may have.

Yes, this printer can print in thermal-transfer mode and direct thermal mode. No ink ribbon is required when using direct thermal labels, allowing for an ink-free printing process. Please contact our technical support team for recommendations or if you have any questions.

In general, this printer can accept ink ribbons with a core diameter of 1″/25.4 mm and with a maximum outer roll diameter of 3.15″/80 mm. We recommend specific ink ribbons depending on the type of label you would like to print, as stated on each label’s product page. Please contact our technical support team if you require more information.

No, this printer can use labels on regular cardboard or plastic cores.

This printer holds label rolls with an outside diameter of up to 8″/205 mm.

No, the cab SQUIX contains no DRM technology and can be used with labels from various third-party manufacturers.

This printer can print various types of thermal-transfer and direct thermal labels and tags. Please contact our technical support team if you would like to receive further information on if a specific label can be used with this printer.

No, this printer does not contain an RFID encoder. Please contact our technical support team if you are looking for a label printer with RFID encoding capabilities.

The rugged design of cab SQUIX allows this model to print more than 500 labels per day.

This issue can be addressed by increasing the heat transferred to the ink ribbon. Please refer to this page if you are using the BarTender software. Please contact our technical support team if you require further assistance.

The printer will receive the actual label size as part of the print job and will typically not need to be manually calibrated. Please refer to the printer instructions to initiate manual calibration.

This printer comes standard with the cablabel S3 Lite label design and barcode software. Please contact our technical support team to inquire about other software options.

Yes, the printer has an opening in the back to allow feeding of labels from an external source in case you want larger label rolls.

Recommended Products