Transparent Cryogenic Laser Labels for Frozen Vials, A4 – 1.5″ x 1″ #A4LCY-36TR
+2
-
To ensure proper adhesion, please remove excess frost prior to affixing the label.
Description
A4 Size CryoSTUCK® – Transparent Cryogenic Laser Labels for Frozen Vials
- Ideal for identifying temperature sensitive samples, no thawing of container or cure time required
- Clear label gives a direct “printed-on” effect without obscuring the surface underneath
- Provided in European A4 sheet format
- Quick template set-up and printable with office and desktop laser printers (will not jam printers or require special toner)
- Can also be written on with pens, most permanent markers, and our indelible Cryo-Markers
Designed for long-term storage in liquid nitrogen (-196°C/-321°F), these transparent CryoSTUCK® labels adhere directly and instantly to difficult-to-label surfaces such as frozen cryo vials, tubes, and cryo boxes without needing an overlap, at temperatures as low as -80°C/-112°F. They are also perfect for dry ice transportation, they can resist high temperatures up to +121°C (+250°F), high humidity conditions, and thawing in heated water baths. They are ideal for use in research institutes, clinical laboratories, biobanks, biorepositories, and biotechnology. These labels in A4 sheet format are printable in most common brands of desktop laser printers to obtain a crisp, scratch-resistant printout that also resists wiping with common sanitizing agents. companies.
Specifications
Frequently Asked Questions
Yes, CryoSTUCK labels have been specially designed for identifying already frozen surfaces. They can be affixed at a minimum temperature of -80°C/-112°F, eliminating the need to thaw valuable samples.
Yes, these CryoSTUCK labels can be used to label vials prior to storing them in low temperature freezers and liquid nitrogen tanks. Please request a sample to test on your vials.
No, these CryoSTUCK labels have a permanent adhesive that is not made for easy removal. For removable cryogenic solutions, see here.
No, an overlap is not required for proper adhesion of these cryogenic labels on ambient or frozen curved and flat surfaces.
No, the vials can be stored in liquid nitrogen (-196°C/-321°F) or ultra-low temperature freezers (-80°C/-112°F) immediately following label application, requiring no cure time.
To ensure proper application of these labels, wipe the surface with a clean lint-free disposable wipe (e.g: KimWipe™) prior to affixing the label to remove excess frost. Apply the edge of the label first and press firmly to anchor it, while avoiding excessive contact with the adhesive. Then press the label securely into position along the vials’ entire circumference.
Yes, these CryoSTUCK labels can be applied over an existing label while not concealing their printed information. This durable label can thus add an extra layer of protection for your label. To cover-up existing labels, our blackout CryoSTUCK labels will conceal pre-existing information.
Yes, these laser CryoSTUCK labels are resistant to a standard autoclave cycle (+121°C/+249°F, 16 psi, 20 minutes).
No, laser CryoSTUCK labels are waterproof and resistant to long-term storage in liquid nitrogen. They offer limited resistance to harsh chemicals, so for any cryo containers that may encounter chemicals, we recommend our thermal-transfer cryo labels.
Please consult our handy sizing guide, where you will find recommendations for the most common vial/tube sizes.
Yes, laser CryoSTUCK labels can be inscribed using ballpoint pens and permanent cryogenic markers. We recommend our Science-Marker™, which is alcohol and water-resistant.
No, these laser labels can be printed on most common desktop or office laser printers using the manufacturer’s recommended toner.
Yes, laser CryoSTUCK labels are designed for on-demand printing, they allow for only a few labels to be printed, while saving the rest for later. These laser labels can withstand multiple passes in desktop laser printers, and will not peel-off or jam the printer.
We provide free online MS Word templates for all our laser labels. See our label templates page to find the appropriate format and download the template associated with your labels.
Yes, laser CryoSTUCK labels can be preprinted with graphics and logos, as well as variable or serialized information from a database. Learn more about our custom printing options.
Our CryoSTUCK transparent laser sheet labels area available in US Letter (8.5″ x 11″) and in European A4 (210 mm x 297 mm) sizes. For more information, please consult our expert technical support team.
