Unitech Handheld UHF RFID Reader with 2D Imager (USA)#EA/RG630-Kit

$1,689.00 usd

Certified for use in North America only. Please contact us for solutions for other regions.

Show more
SKU: EA/RG630-Kit Category:


Unitech Handheld UHF RFID Reader with 2D Imager (USA)

Operating Frequency: FCC 902-928 MHz

Operating System: Android 10

Scanner Type: Imager, 1D and 2D barcodes

Style: Gun Grip

Standards Supported: EPC Class 1 Gen 2 V2

Interface: Wi-Fi, Bluetooth, 4G cellular connectivity

Location Services: GPS / A-GPS

Communications: USB 3.1 Type C, Ethernet/ USB-Host via Cradle (Optional)

Memory: 3GB RAM / 32GB Flash

Memory Expansion: MicroSD (128 GB Max)

Battery: 4000 mAh internal (lithium polymer)

Expansion Slot: MicroSD, up to 256 GB

For More Specs, Click Here

What’s in the box:

  • Unitech EA630 rugged smartphone
  • RG630 UHF RFID gun grip
  • Single slot charging cradle
  •  USB Cable
  •  Power Adapter
  •  Hand strap


There are no reviews yet.

Be the first to review “Unitech Handheld UHF RFID Reader with 2D Imager (USA)#EA/RG630-Kit

Frequently Asked Questions

The RFID reader comes with the following:

  • Unitech EA630 rugged smartphone
  • RG630 UHF RFID gun grip
  • Single-slot charging cradle
  • USB Cable
  • Power Adapter
  • Hand strap

Yes, the smartphone component is equipped with a 2D imager to scan most common 1D and 2D barcodes. It also reads NFC tags.

The UHF gun grip is an extension of the smartphone meant to specifically read UHF tags.

The UHF reader has a maximum read range of 6m (19.6 feet). However, please note that the read range also depends on the size and thus the signal strength of the antenna and may therefore be lower than the maximum read range of the reader.

The fastest read rate is 750 tags/second. However, this rate is affected by environmental factors and may therefore be lower.

No, the device comes with no software for scanning RFID tags pre-installed. You would have to integrate the reader into an already existing platform, e. g. an RFID-enabled LIMS. We can provide you with a basic program from the manufacturer, allowing you to execute a few basic functions, such as taking RFID tag inventory and reading/writing individual tags.

No, but we are working to provide you a complete RFID solution. Please contact us if you’d like to be notified once we can offer a suitable software.

The device is equipped with a 4000 mAh battery, which can last for up to 16 hours of working time, depending on use.

The device complies with FCC regulation in the USA and is BIS certified in India. Please contact us for certification in other regions.