DYMO-Compatible Cryogenic Labels – 1.04″ x 0.5″ + 0.375″ circle #EC1F/EG1F-081

SKU: EC1F/EG1F-081
Class: EC1F/EG1F

$65.90 usd

Description

Cryo-DTermo™ – DYMO-Compatible Cryogenic Labels

 

  • Resist extreme cryogenic temperatures (-196°C in liquid phase and vapor phase Liquid Nitrogen)
  • Compatible with the 450 series and 4XL DYMO® LabelWriters
  • Ideal for the identification of 0.5 – 5 ml vials and tubes
  • Resistant to gamma irradiation (tested up to 50 KGy)

DYMO compatible direct thermal cryo labels. For ultra-low and cryogenic temperature applications (as low as -196°C). Ideal for identification and permanent storage of vials and containers in liquid nitrogen and laboratory freezers (-80°C, -50°C, -20°C).

Specifications

Size:   1.04″ x 0.5" + 0.375" circle
(26.4 mm x 12.7 mm + 9.5 mm)

Sets/Roll:   500 (1″ core)

Set Definition:   Rectangle + Circle

Perforated:   No

Media Sensing:   Notch, Black Mark

Temperature Range:   -196°C to +70°C
(-320.8°F to 158°F)

Adhesive:   Permanent

Printing Methods:   Dymo LabelWriter

Resistances:   Cryogenic (-196°C), Deep-Freeze (-80°C), Gamma Irradiation

Class:   EC1F/EG1F

Brand:   Cryo-DTermo™

Color(s):   Beige, Blue, Green Apple, Grey, Lemon, Moka, Orange, Red, Violet, White, Yellow

Reviews

Anonymous
3 out of 5
2023-09-18
Great cryo labels which are compatible with our lab Dymo printer. Although they sometimes jam which can waste a few labels
Mark Andersen
5 out of 5
Auckland, New Zealand nz
2023-05-04
Does the job
Marija Vrljic
5 out of 5
United States us
2022-06-08
We used these at my previous job, so I wanted to get them again for my current research lab situation; they work great!
Anonymous
5 out of 5
United States us
2022-02-23
Great quality
Anonymous
5 out of 5
Oregon, United States us
2021-12-17
Work great in our Dymo. Saves our lab tons of time not dealing with full sheet label printers for single samples.
Alvaro
5 out of 5
California, United States us
2021-12-13
Perfect fit on the Dymo-label maker and on our cryovials (flat cap) a good option
Anonymous
5 out of 5
New York, United States us
2021-08-26
Works great for labeling tubes
David Glover
5 out of 5
Virginia, United States us
2021-08-20
These dymo labels are great and work well for cryovials. The templates that are available on the website are very helpful in designing the label content. The Dymo Label version works better than the Dymo Connect version because the template has the correct orientation. LabTag tech support was great in helping me to sort this out.
Anonymous
5 out of 5
Massachusetts, United States us
2021-08-11
great! Works well on 1.5mL tubes
Egor A.
5 out of 5
Massachusetts, United States us
2021-06-16
Good labels
Michelle W.
5 out of 5
Maryland, United States us
2020-12-16
I have not used the labels yet but it was received as advertised.
Laura Van Laeken
4 out of 5
Flanders, Belgium be
2020-10-14
works as usual
Anonymous
3 out of 5
United States us
2020-09-10
They sometimes get stuck in the machine.
Sharon Oldford
3 out of 5
Nova Scotia, Canada ca
2020-09-09
Tube label is a bit small and the roll tends to get jammed on the DYMO Label Writer printer.
Anonymous
5 out of 5
Kentucky, United States us
2020-08-28
It is resistant to liquid nitrogen. I tested.
Zach Siler
5 out of 5
Wyoming, United States us
2020-06-18
These labels have saved my company so much time from hand labeling cryotubes!
Sviataslau Sasinovich
3 out of 5
Skåne, Sweden se
2020-04-30
Overall, these labels are perfect! But sometimes when I used white colour labels, and orientate the label in the middle of the sticker, my DYMO printed the label outside the sticker so I can't read the label, especially on the circle cap sticker. For some reason, yellow stickers work much better than the white one.
Justine
5 out of 5
California, United States us
2020-04-28

Frequently Asked Questions

No, Cryo DTermo labels do not require a ribbon to print. They are a class of direct thermal labels, in which a printout is achieved by simply applying heat to the label surface, using a heated printhead.

Yes, Cryo DTermo labels are designed specifically to work with DYMO LabelWriter printers. For more information regarding our DYMO-compatible solutions see here.

.

No, our DYMO-compatible labels work with LabelWriter DYMO printer models that do not require a cartridge. Namely the LabelWriter 450, 450Turbo and the 4XL models.

No, though Cryo DTermo labels are classified as direct thermal labels, they cannot be printed with traditional direct thermal printers. They are designed to work specifically with DYMO printers, and only with DYMO printers.

DYMO LabelWriter barcoding software can be used to create templates that conform to the size of your label. You can then insert design elements within the template, for easy printing. Preconfigured templates for all of our DYMO-compatible can be found here.

You can download the DYMO LabelWriter software by visiting the DYMO website. Software and drivers for either PC or Mac are available for download.

Please consult our handy sizing guide where you will find recommendations for the most common vial/tube sizes.

No, these labels are not chemical-resistant. However, we do offer a line of chemical-resistant DYMO-compatible labels that withstand exposure to harsh chemicals, including spraying with alcohols.

No, these DYMO-compatible labels will turn entirely black when exposed to elevated temperatures and should not be used for high-heat applications. This includes sterilization by steam autoclaves and dry heat ovens. For heat-resistant DYMO-compatible labels, we recommend our Zesti-DTermo™ labels.

Yes, we offer a line of DYMO-compatible paper labels that are ideal for all general use applications, including office work, such as filing.

Recommended Products